jokaboat wrote:It's either a small hole which can get clogged by crud, in which case get a fine drill and rotate it by hand to clear the debris, or it's a pressure plate which transfers the pressure up a tube to the speedo. If the latter it might be that the tube has come loose at one end or t'other or the tube has a hole in it somewhere or the tube has a kink.
Ed wrote:Here we go have a look at these:
http://teleflexmarine.com/wp-content/up ... ometer.pdf
Rinker wrote:Hi Cem,
I had the same problem with mine. I disconected the tube where it attaches to the outdrive them got a piece of MIG welder wire and pushed it into the hole at the bottom end end and then the top end and cleared the obstruction. I finished the job off with a good blow through from an airline. Job Done speedo working.
Users browsing this forum: No registered users and 0 guests